Performance Indicators

Printing parameters

1. Best print temperature: 220-260℃
2. Bed temperature: 70-110℃
3. Feed rate: 20-90mm/s
4. Idling speed: 90-150mm/s

Printing notices

1. Level printing plate before starting;

2. Heat the hot bed to 70~110℃ before printing, paste transparent golden polyimide high temperature resistance tape to the surface and keep it clean;

3. Keep a optimum distance between nozzle and plate (which allows you to paint out a flat line while moving your nozzles; if too far the line will be much mellow and too close will be hard to let filament out);

4. A lower filling rate can remit shrinkage crack for ASA during printing process;

5. Nozzle diameter should be bigger than layer thickness. Try parameter like 0.2, 0.25, and 0.3;

6. Better keep cooling fan off when printing and print in a closed area. Putting flapper around printer also helps to keep constant temperature environment.

PS: eASA has weak tear resistance, please try to avoid drag or twine; it’s also suggested to apply glue to plate to help it stick.

STORAGE: One large resealable bag with slider + an extra desiccant pack are included with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry & free from any dust or dirt particles, so it's always ready for your next print.